期刊名称：An International Journal of Optimization and Control: Theories & Applications (IJOCTA)
印刷版ISSN：2146-5703
出版年度：2012
卷号：2
期号：2
页码：105-112
DOI：10.11121/ijocta.01.2012.0047
语种：English
出版社：An International Journal of Optimization and Control: Theories & Applications (IJOCTA)
摘要：Forming is a compression-tension process involving wide spectrum of operations and flow conditions. The result of the process depends on the large number of parameters and their interdependence. The selection of various parameters is still based on trial and error methods. In this paper the authors presents a new approach to optimize the geometry parameters of circular components, process parameters such as blank holder pressure and coefficient of friction etc. The optimization problem has been formulated with the objective of optimizing the maximum forming load required in Forming. Genetic algorithm is used for the optimization purpose to minimize the drawing load and to optimize the process parameters. A finite element analysis simulation software Fast Form Advanced is used for the validations of the results after optimization.
