摘要：Abstract
Background
Solar module is considered as fundamental power transformation unit of Photovoltaic (PV) generation system. The performance of a PV array strongly depends on operating environmental conditions such as operating temperature, solar insolation, shading array configuration. Often PV arrays get shadowed fully or partially by passing cloud, building, poles, trees, etc. Under such partial shading conditions, the operation of PV arrays get more complicated with more than one peak and it is very important to predict the characteristics to obtain possible maximum power. Furthermore, the mismatch losses and hotspot effects caused by partially shading cannot only affect the output power of solar system also can bring security and reliability problem. However, it is quite expensive and takes much time to get operating output characteristics of PV arrays under non uniform working conditions. Therefore, it is necessary to have a simulation model to study the effect of partial shading on solar PV arrays’ working characteristics. A 100 W solar panel is used as reference. The study also focuses on position of output peak power with varying location of shaded modules, different levels of solar irradiation as well as role of bypass diodes in this system.
Result
The I–V and P–V output curves of the solar PV arrays under partially shading conditions are given. The simulation results indicate that the higher number of shaded solar modules is, the lower value of power output is and the position of maximum power point does not depend on location of modules under shadow.
Conclusion
The paper provides an easy method to study the response of solar PV arrays under non uniform working conditions: partial shadow. In addition, the following points were also investigated:
Impact of varying position of shaded modules on PV array’s characteristics.
Impact of different levels of solar irradiation accompany with varying temperature on solar PV array’s operation under partially shading condition.
Role of bypass diode in improving operation of solar system under non uniform condition.
关键词：KeywordsEnMatlab/SimulinkPhotovoltaic arraysShading effectP–V and I–V characteristicsBypass diode
