摘要：Abstract
Background
Photovoltaic (PV) array which is composed of modules is considered as the fundamental power conversion unit of a PV generator system. The PV array has nonlinear characteristics and it is quite expensive and takes much time to get the operating curves of PV array under varying operating conditions. In order to overcome these obstacles, common and simple models of solar panel have been developed and integrated to many engineering software including Matlab/Simulink. However, these models are not adequate for application involving hybrid energy system since they need a flexible tuning of some parameters in the system and not easily understandable for readers to use by themselves. Therefore, this paper presents a step-by-step procedure for the simulation of PV cells/modules/arrays with Tag tools in Matlab/Simulink. A DS-100M solar panel is used as reference model. The operation characteristics of PV array are also investigated at a wide range of operating conditions and physical parameters.
Result
The output characteristics curves of the model match the characteristics of DS-100M solar panel. The output power, current and voltage decreases when the solar irradiation reduces from 1000 to 100 W/m2. When the temperature decreases, the output power and voltage increases marginally whereas the output current almost keeps constant. Shunt resistance has significant effect on the operating curves of solar PV array as low power output is recorded if the value of shunt resistance varies from 1000 ohms to 0.1 ohms.
Conclusion
The proposed procedure provides an accurate, reliable and easy-to-tune model of photovoltaic array. Furthermore, it also robust advantageous in investigating the solar PV array operation from different physical parameters (series, shunt resistance, ideality factor, etc.) and working condition ( varying temperature, irradiation and especially partial shadow effect) aspects.
关键词：KeywordsEnPhotovoltaic arrayMatlab/SimulinkP–V and I–V curveSimulationTag
