摘要：The maximum horizontal impact load experienced by the aircraft landing gear wheel during landing is an important parameter in landing gear safety design and performance analysis. Using a non-contact photoelectric testing method, this paper experimentally obtained the dynamic data of the instantaneous rotational speed for an aircraft wheel when it contacts the platform. Moreover, the kinetic relationship between the transient rotational speed of the aircraft wheel and the force of horizontal impact was established. According to the change data measured from the transient rotational speed of the aircraft wheel, the maximum horizontal impact load at the instant of aircraft contact with the platform was calculated. To verify the accuracy of this method, in which changes in rotational speed determine the horizontal impact load, verification equipment without lateral constrains was established to test the horizontal impact load of the aircraft wheel. The experimental results showed that the horizontal impact load determined by the transient rotational speed of aircraft wheel is consistent with the results obtained by self-built measurement equipment without lateral constrains.
