首页    期刊浏览 2024年11月26日 星期二
登录注册

文章基本信息

  • 标题:APPLICATION OF CHEMICAL PRE-TREATMENT ON THE POLISHED SURFACE OF ALUMINIUM ALLOYS
  • 本地全文:下载
  • 作者:Pavel Kraus ; Pavel Kraus ; Jaroslava Svobodova
  • 期刊名称:Advances in Science and Technology Research Journal
  • 印刷版ISSN:2080-4075
  • 电子版ISSN:2299-8624
  • 出版年度:2016
  • 卷号:10
  • 期号:32
  • 页码:17-23
  • DOI:10.12913/22998624/65112
  • 语种:English
  • 出版社:Society of Polish Mechanical Engineers and Technicians
  • 摘要:This paper reports the preparation and characterization of thin transparent nanolayers with phase composition ZrF4 and different modification of SiO2 with special focus on affecting the surface roughness of the material and the way of exclusion of the thin nanolayer on the surface of the polished aluminium material. The thin nanolayer was prepared by the sol-gel method. The final treatment based on PTFE was applied on the surface of some samples. This treatment is suitable for increasing wear resistance. The films were characterized with help of SEM microscopy and EDS analysis. The surface roughness was measured with classical surface roughness tester. The results on this theme have already published but not on the polished surface of the aluminium material. The results from the experiment show the problems with application of these nanolayers because a cracks were found on the surface of the material and deformations of the layer after application of the PTFE final layer. The surface layer formation is discussed.
  • 关键词:sol-gel technology;nanolayers;aluminium alloys;surface roughness;SEM
国家哲学社会科学文献中心版权所有