期刊名称：Advances in Science and Technology Research Journal
印刷版ISSN：2080-4075
电子版ISSN：2299-8624
出版年度：2016
卷号：10
期号：32
页码：24-31
DOI：10.12913/22998624/65111
语种：English
出版社：Society of Polish Mechanical Engineers and Technicians
摘要：The article is focussed on comparing and determining the impact of the cutting geometry of the cutting tool due to dynamic load on system and microgeometry machined surface. For longitudinal turning nickel alloy Alloy 625 (W. Nr. 2.4856) rounded indexable cutting insert was used (RCMT 10T3M0 – F2) and its equivalent squared indexable cutting insert (SNMG 120412 – MR3) coated with fine-grained PVD (Ti, Al) N + TiN. Experimental testing of nickel Alloy 625 was under predetermined cutting conditions. In the selected depth of the removed material of 0.5 mm and 1.5 mm was measured in the course of machining the size of the individual components of cutting forces.
关键词：nickel Alloy 625;cutting geometry;cutting force
