期刊名称：Advances in Science and Technology Research Journal
印刷版ISSN：2080-4075
电子版ISSN：2299-8624
出版年度：2016
卷号：10
期号：31
页码：139-143
DOI：10.12913/22998624/64070
语种：English
出版社：Society of Polish Mechanical Engineers and Technicians
摘要：The technical practice requirements comes to have increased demands on higher productivity, speed and quality of the machining process of various materials. Hard to machine materials, whose machining led to the development of turning with rotating cutting edge are not an exception. The machining process of auto-rotating tool is more complicated than the conventional process of turning, especially for the process of reshaping cutting layers into chips. There is a significant load in the system, that may affect the life of the cutting edge of the tool as well as the whole system and also in the final extent of the qualitative parameters of the workpiece (product / product). The article specifies the knowledge and findings of measurement in machining material 100Cr6 with an auto-rotating tool. The measurements were conducted to evaluate the integrity of the surface (roughness) of the workpiece to the impacts of cutting conditions, in particular the feed and the cutting edge inclination. It also analyzes the presence (size, character, action) of residual stresses concentrated in the surface layers of the workpiece by changing the cutting conditions.
