期刊名称：Advances in Science and Technology Research Journal
印刷版ISSN：2080-4075
电子版ISSN：2299-8624
出版年度：2013
卷号：7
期号：20
页码：55-60
DOI：10.5604/20804075.1073058
语种：English
出版社：Society of Polish Mechanical Engineers and Technicians
摘要：When the tool leaves the part during machining operations, burrs can form as a result of material plastic flow. Wire brushing is one of burr removing methods. Low cost of brushes which can be mounted in a milling center gives the perspective of developing this method. The article was aimed at presenting the results of brushing process upon edge radius after wire brushing of AZ91HP magnesium alloy. Three kinds of brushes were tested with different types of fibers and the diameter of a single fiber. Brass and steel brushes were used.
