摘要：Indonesia has several creative economy sectors that rapidly developed and potentially can be improved to 7% annually. One of them is textile industry specifically bag industry. This industry’s development could enhance the production of commodities and emerge other SMEs to initiate the similar field. Therefore, to raise its profit, customer’s satisfaction must be elevated by minimizing defected products. In order to support it, an improvement on production process is a must. This research employs Six Sigma methods integration with Fuzzy Analytical Hierarchy Process (Fuzzy AHP)-Failure Mode and Effect Anlysis (FMEA). Six Sigma is designated to analyze the level of products’ defect through Define, Measure, Analyze, Improve, and Control (DMAIC) stages and assess the factors that cause the defects by using Fuzzy AHP decision support system and FMEA in risk analysis on defect. The result of the research shows the shortage of defects that demonstrated by DPMO indicator and Sigma level. It is identified that the number of DPMO was being reduced from 20003.75 to 11185.73. While Six Sigma level demonstrated the enhancement from 3.61 to 3.86. Those suggest that the improvement solution provides has significant effect on the defects decreasing at the bag convection industry.
