期刊名称：International Journal of Industrial Engineering Computations
印刷版ISSN：1923-2926
电子版ISSN：1923-2934
出版年度：2012
卷号：3
期号：5
页码：887-892
DOI：10.5267/j.ijiec.2012.05.003
语种：English
出版社：Growing Science Publishing Company
摘要：Wire electrical discharge machining (WEDM) is well known process for generating intricate and complex profiles in hard metal matrix composites. But damaged surface layer with poor surface integrity is a major disadvantage of WEDM. Beside poor damaged surface layer, after rough/first cut in WEDM, some surface area remains unmachined on work surface during intricate machining such as in die cutting. This paper presents a study on unmachined surface area named as surface projection, in die cutting after rough cut in WEDM. Using scanning electron microscope images, length of unmachined surface projections have been determined. In order to minimize these surface projections from small cavities having complex geometries, trim cutting operation is the best alternative. Results show that using more than one trim cut with appropriate wire offset value, surface projections can be minimized, successfully.
