摘要：Within a wide range of theoretical and experimental research, the possibility of realizing a new method of superficial treatment of materials made of metallic powders and the validation of the results obtained after the treatments were carried out with gas discharge lamps. The structural transformations carried out in the superficial layer of the pieces made of metal powders used in the experiments led to a statistical analysis of the results obtained in this article. Thus, with the TREND statistical function of Excel program, the evolution of the changes in roughness was determined, depending on the variable parameters of the treatment process. The verification was performed with the ZTEST function by making assumptions about the average values of selection reported against the critical value of the test. The results were interpreted on the basis of the phenomena and processes that occur at superficial level at the interaction of the radiation with thenon-mogeneous layer specific to the pieces made by the aggregation of powders, consisting of granules and pores. The conclusions recommend the optimal treatment regimes in order to obtain the maximum efficiency of the action of the optical radiation pulses emitted by the gas discharge lamps on the surface of the metal powders.
关键词：superficial treatments;metal powders;gas discharge lamps;TREND statistical function;ZTEST statistical function
