期刊名称：Journal of Environmental Science and Natural Resources
印刷版ISSN：2408-8633
出版年度：2014
卷号：7
期号：2
页码：53-58
DOI：10.3329/jesnr.v7i2.22204
语种：English
出版社：Bangladesh Society for Conservation of Environment and Natural Resources
摘要：The study was conducted to observe effluent management technique, physico-chemical characteristic (BOD, TDS, DO, pH, EC, temperature, color, odor, transparency and heavy metals) at different steps of effluent treatment process and compare those with standards of Bangladesh Environmental Conservation Rules (ECR)-1997. Nine effluent samples were collected from Impress Newtex Composite Textile Ltd Industries at Gorai under Mirzapur Upazila during the month of January to June 2013. The color and odor of the inlet effluent samples were highly colored and emit foul smell, respectively but in case of outlet effluent samples very low. The DO, BOD, TDS, EC, pH, temperature, transparency value of all collected samples from ETP outlet were 5 mg/l, 42 mg/l, 2245 mg/l, 192 μs/cm, 6.5, 31.2 cm, respectively which fulfils ECR (1997) standards for inland surface water, public sewerage water and land for irrigation excepts the value of TDS. In case of heavy metal (Pb, Zn &Ni) assessment the concentrations of all collected samples were within the permissible limit according to ECR, 1997 accepts Pb for inland surface water and land for irrigation. Different types of dyes and chemicals were used during fabrics dyeing. As a result, the values of different physico-chemical parameters were more in inlet effluent but due to treatment its shows less value at the outlet effluent which fulfils ECR (1997) standards requirement. Only best management practices can ensure the best effluent quality discharged into the environment as well as best performance of ETP.DOI: http://dx.doi.org/10.3329/jesnr.v7i2.22204 J. Environ. Sci. & Natural Resources, 7(2): 53-58 2014
关键词：Environmental Science and Resource Management;Effluent; Textile industry; Heavy metals
