期刊名称：Advances in Science and Technology Research Journal
印刷版ISSN：2080-4075
电子版ISSN：2299-8624
出版年度：2018
卷号：12
期号：1
页码：89-98
DOI：10.12913/22998624/81001
语种：English
出版社：Society of Polish Mechanical Engineers and Technicians
摘要：The use of form tools are growing in industry owing to their inherent advantage of improving productivity. However, the accurate formation of form tool profile is really a tedious task. In this research work, wire electric discharge machining (WEDM) process has been used for the generation of form tool. Pulse on-time, pulse off-time, servo voltage, wire tension, flushing pressure have been considered as input parameters whereas tool geometry (clearance angle, included angle), surface roughness and material removal rate are the selected responses. Response surface methodology (RSM) (Box Bhenken experimental design) technique has been used for design of experiments. Analysis of Variance (ANOVA) has shown that pulse on-time and pulse off-time are the two influential control factors for material removal rate (MRR), surface roughness (Ra), clearance angle and included angle. Contour plot analysis has been performed to find out the optimal ranges of the most influential control factors for each response characteristic.
关键词：ANOVA;response surface methodology;wire electric discharge machining;material removal rate;surface roughness
