摘要：A method of experimental study of heat transfer processes between industrial constructions during a fire was developed. Types of equipment necessary for the conduction of the experimental studies were determined. A new type of specimen to be used as the one to be studied when conducting experimental studies was developed. Installation sites of thermocouples and heat flux detector on the specimen under study are shown as layout. Installation sites of the specimens under study relative to heat radiation source were substantiated experimentally. Succession of the conduction of the experimental studies of heat transfer processes between industrial constructions during a fire was developed which consists of the following procedures: production of specimens for the studies, measurement and recording on ambient conditions, measuring of temperature and heat flux on the surface of the specimen under study, and filling 55B test fire with water and diesel fuel. It was established that average temperatures and heat flux density values as well as flame geometry should be measured when performing experimental studies.
