期刊名称:Advances in Science and Technology Research Journal
印刷版ISSN:2080-4075
电子版ISSN:2299-8624
出版年度:2018
卷号:12
期号:3
页码:47-54
DOI:10.12913/22998624/92099
语种:English
出版社:Society of Polish Mechanical Engineers and Technicians
摘要:This paper examines the effect of selected factors on the wood bonded joint strength. The structural factor under scrutiny was the geometry of the surface area; however, other major dimensions of adherends were compared as well. The tests were performed on 6 joint types: butt, v-shaped, interlocking, scarf, tongue & groove, and single lap joints, which were formed on two types of substrate materials – pine and oak wood, and adhesively bonded. The joints were bonded with Prefere 6312 wood adhesive and Loctite 3430 two-component epoxy adhesive. Strength testing of the joints was performed on Zwick/Roell Z150 material testing machine, according to DIN EN 1465 standard. The results obtained from the tests indicate that bonded joints of oak wood exhibit higher strength properties than those of pine wood adherends, which was confirmed in nearly all strength tests.