摘要：In the paper the results of investigations into HFE-7100 flow boiling heat transfer in a cylindrical minigap a 1 mm wide created between the external glass pipe and the copper pipe were discussed. A cartridge heater located axially heated fluid flowing along the minigap. The cooling fluid temperature and pressure at the inlet and the outlet to/from the minigap and temperature of the heater in 18 points were measured. Two-dimensional mathematical model for heat transfer coefficient determination was proposed. It was assumed that in the test section the heat transfer process was in steady state and the fluid flow was laminar. The temperature of the metal pipe near the heater was assumed to satisfy Laplace’s equation. The problem formulated in this way was solved by two methods: the Fourier transform and the Trefftz method. The working fluid temperature was calculated depending on the flow type: for single phase flow with boiling incipience and for two-phase flow, respectively. The heat transfer coefficient at the fluid – copper pipe interface was calculated due to the Robin condition. Local heat transfer coefficient values obtained from the Fourier transform and from the Trefftz method were similar. Results were presented and discussed.
