期刊名称：International Journal of Environment and Geoinformatics
电子版ISSN：2148-9173
出版年度：2016
卷号：3
期号：3
页码：57-75
DOI：10.30897/ijegeo.306482
语种：English
出版社：IJEGEO
摘要：In this study, a limestone rock core specimen with 6.94 cm x 4.95 cm dimensions was exposed to tensile forceby Brazilian test and rough surfaces were obtained. Following the Brazilian test, roughness angles weremeasured by a laser scanner along one side of the rock specimen. For this purpose, Nextengine 3D Desktopscanner was used. The 17 profiles were studied along the width of the core with a 0.3 mm interval.Approximately 10000 points produced for each profile, some of them are in the “+” and some are in the “-”direction along each profile. Maximum and minimum roughness angles are calculated as 65.580 and 1.56x10-5degree respectively. The average roughness angle value of the profiles is 13.870. The percentage of theroughness angle between 13 and 14 degrees were 2.65% and 2.70% for “-” and “+” directions on the rocksurface, respectively. Mathematical analyses of 17 profiles showed that roughness profiles can be expressed by21st – 30th degree polynomial equations with approximately 10-4 degree standard deviation.
