摘要:It is well known that the residual stresses on the ground surface and the subsurface can influence the service quality of a component, such as fatigue life, tribological properties, and distortion. In this paper, an experimental investigation was conducted to determine the effects of grinding force, temperature and grinding conditions, such as grinding speed, workpiece speed and grinding depth, on the surface and in-depth residual stresses distributions induced by grinding of 3J33 maraging steel with the miniature electroplated CBN Wheels. The results show that a ‘hook’ shaped residual stress profile is generated with the maximum compressive stresses occur at the depth of 3-14 ?m below the ground surface. There is a good correlation between residual stress and cutting force, but the trend related to grinding temperature is not obvious. The main grinding parameters affecting the residual stresses distributions is grinding speed, while the workpiece speed and grinding depth have the least effect.