标题：Determination of number and diameter of superheated droplets in bubble detectors (BD) of Type T-12 by irradiation with high energy heavy ions 56Fe, 84Kr and 132Xe at accelerator
摘要：AbstractThe number (n) and diameter (d) of superheated droplets in bubble detectors of Type T-12 have been determined with high-energy heavy ions56Fe,84Kr and132Xe at HIMAC accelerator in the National Institute of Radiological Sciences (NIRS), Chiba Japan. The approach to determining the number and diameter of superheated droplets is based on determination of (1) the average gap distance (g) between two neighboring bubbles in a track of high-energy heavy ion and (2) the volume ratio (VL/V) of superheated droplets to the whole volume of the detector. The volume ratio is known from preparation process of bubble detectors. The average gap distance can be obtained from the mean of gap distances measured between two neighboring bubbles in a track of heavy ion. FromgandVL/Vone can obtain the two basic parametersnanddof the bubble detector, which are unknown due to invisibility of superheated droplets in bubble detector. Four batches of bubble detectors of Type T-12 were calibrated by this approach. It shows that the average gap distance of bubbles in the detectors is ∼1 mm, the volume density (numbern) of superheated droplets in the detectors is ∼106 cm−3and the diameter of superheated droplets is in the range from ∼30 to 50 μm. It also shows that the two parametersnanddare different from batch to batch of the detectors whenVL/Vis the same. Therefore, one should make a calibration of bubble detectors at accelerator with heavy ions before using the detectors. This property is similar to that of etch track detectors (SSNTD).
关键词：Bubble detector;Number of superheated droplets;Diameter of superheated droplets;Gap distance between two neighboring bubbles in a track;Calibration of bubble detectors with heavy ions at accelerator;Grubbs criteria for rejecting parasitic erroneous data
