摘要：We describe the measurement and spatial variability of particulate matter (PM) chemical composition, PM 10 and PM 2.5 in the Greater Tubatse Municipality, South Africa. Monthly samples were collected over 12 months (July 2015 to June 2016) using the inexpensive and easy to operate passive samplers of the University of North Carolina. Sites for sample collection were located at private residences, a church, a hospital and a school. Concentrations of PM 10 , PM 2.5 and PM chemical components were determined using computer-controlled scanning electron microscopy with energy-dispersive X-ray spectroscopy. The annual observed concentrations at all sites were below the South African National Ambient Air Quality Standards of 40 µg/m 3 for PM 10 and 25 µg/m 3 for PM 2.5 . The Cr-rich and CrFe-rich particles showed substantial heterogeneity with high concentrations observed near the chrome smelters, and Si-rich particles were highest near the silicon mine. SiAl-rich particles were highest at sites close to busy roads, while SiAlFe-rich particles were less spatially distributed. The low spatial variability of SiAlFe-rich particles indicates that these elements are mainly found in crustal material. Using the synoptic meteorological parameters of The Air Pollution Model, we were unable to effectively determine correlations between PM 10 and mixing height, Monin–Obukhov length, air pollution potential, or coefficient of divergence.Significance:• We have shown that the use of University of North Carolina passive samplers coupled with computer-controlled scanning electron microscopy is effective in determining the chemical composition of PM.• The use of passive samplers is a cheap and effective method to collect data in remote areas of South Africa which have limited or no electricity supply.• Assessment of the spatial distribution of PM and PM chemical components can assist in the development of effective air quality management strategies.
