期刊名称：Advances in Science and Technology Research Journal
印刷版ISSN：2080-4075
电子版ISSN：2299-8624
出版年度：2020
卷号：14
期号：1
页码：89-95
DOI：10.12913/22998624/113615
语种：English
出版社：Society of Polish Mechanical Engineers and Technicians
摘要：Titanium super alloys are often used in the chemical and aerospace industries, especially because of financial sav-ings, resulting primarily from cheaper operation of equipment. Machinability of titanium alloys is more difficultthan that of other metals. In addition, the low thermal conductivity causes the alloy to stick to the cutting edgeof the cutting tool, thereby causing it to become dull faster. The article deals with the experimental evaluation ofcutting forces and the design of suitable cutting parameters for the machining of the UNS R56260 titanium al-loy with high-feed milling technology. Testing was carried out in climb and conventional milling under differentcutting conditions. The cutting components of forces Fx, Fy, Fz were measured and evaluated. The results of themeasurements were processed into a graphical form and suitable cutting conditions were designed in terms of theacting cutting forces.
