摘要：AbstractHeat stress is a significant health concern that can lead to illness, injury, and mortality. The wet bulb globe temperature (WBGT) index is one method for monitoring environmental heat risk. Generally, WBGT is estimated using a heat stress monitor that includes sensors capable of measuring ambient, wet bulb, and black globe temperature, and these measurements are combined to calculate WBGT. However, this method can be expensive, time consuming, and requires careful attention to ensure accurate and repeatable data. Therefore, researchers have attempted to use standard meteorological measurements, using single data sources as an input(e.g.,weather stations) to calculate WBGT. Building on these efforts, we applydata from a variety of sources to calculate WBGT, understand the accuracy of our estimated equation, and compare the performance of different sources of input data. To do this, WBGT measurements were collected from Kestrel 5400 Heat Stress Trackers installed in three locations in Alabama. Data were also drawn from local weather stations, North American Land Data Assimilation System (NLDAS), and low cost iButton hygrometers. We applied previously published equations for estimating natural wet bulb temperature, globe temperature, and WBGT to these diverse data sources. Correlation results showed that WBGT estimates derived from all proxy data sources—weather station, weather station/iButton, NLDAS, NLDAS/iButton—were statistically indistinguishable from each other, or from the Kestrel measurements, attwo of the three sites. However, at the same two sites, the addition of iButtons significantly reduced rootmean square error and bias compared to other methods.Plain Language SummaryHeat stress is a buildup of body heat that can lead to illness, injury, or death. One method for estimating heat stress is an index called wet bulb globe temperature (WBGT). The index is usually measured with a monitor that records three types of temperature measurements and combines them. However, this method can be expensive, time consuming, and requires careful attention. Therefore, researchers have tried to use standard measurements such as wind speed, temperature, humidity, etc., to calculate WBGT. Building on these efforts, we wanted to determine if it was possible to accurately calculate WBGT with a variety of inexpensive data sources in central Alabama. We used previously published equations to estimate WBGT. Results showed that all proxy methods accurately estimated WBGT in two Alabama locations, but that using local measurements did change estimates of the number of potentially dangerous heat episodes relative to estimates that rely on remote sources of weather data. The ability to use easily accessible measurements could be a powerful tool for studies and interventions related to heat stress.Key PointsA variety of proxy methods offered reasonable estimates of wet bulb globe temperature (WBGT) in downtown and suburban Birmingham, ALEstimating WBGT from easily accessible measurements could be a powerful tool for studies and interventions related to heat stress
