期刊名称：International Journal of Sustainable Engineering
印刷版ISSN：1939-7038
出版年度：2020
卷号：13
期号：1
页码：54-67
DOI：10.1080/19397038.2019.1592261
语种：English
出版社：Taylor & Francis Group
摘要：ABSTRACTA systematic study of the diffusion mechanism and effect of mass transfer limitation during the adsorption of CO2 onto polyaspartamide is presented using a differential adsorption bed method, carried out in a 100 × 60 × 40 mm packed-bed adsorption unit. The rate-limiting step where mass transfer limitation is dominant was studied using diffusion models. It was observed that intraparticle diffusion mechanism is the major contributor to the resistance offered to the transport of gas molecule through polyaspartamide. The behaviour of polyaspartamide, based on the intraparticle diffusion rate parameter derived from the plots of CO2 adsorbed versus the square root of time, signified that the adsorption mechanism involved both film and intraparticle diffusion. The intraparticle diffusion parameter (kid) obtained was dependent on temperature as well as intraparticle convection effects and ranged from 1.24 × 10−4 to 2.13 × 10−4 ms−1. The Biot number (Bi) values were all greater than 10 (ranged from 17.80 – 30.74), confirming that the intraparticle diffusion was the rate-limiting step and heat transfer is more by conduction from the gas film layer than convection within the pores of polyaspartamide. Results from this study provide an important basis for future scale-up and optimisation of CO2 capture process using polyaspartamide.
