期刊名称：Walailak Journal of Science and Technology (WJST)
印刷版ISSN：2228-835X
出版年度：2020
卷号：17
期号：7
页码：686-697
语种：English
出版社：Institute of Research and Development, Walailak University.
摘要：Polymer solution has been used for increasing viscosity of ophthalmic solution in order to prolong the retention of active drug in the eye. The ophthalmic solution must be sterilized, which may affect the rheology properties of viscosity-inducing polymers. The aim of this study was to investigate the effect of sterilization treatment on viscosity-inducing agents (i.e., poloxamer, polyvinyl alcohol; (PVA), methyl cellulose (MC), polyvinylpyrrolidone (PVP) and carbomer). The effect of membrane filtration and steam sterilization or autoclaving (121 °C, 15 Ib/inch2, 15 min) were determined. A rheometer was used to investigate the viscosity and viscoelastic properties between treated and untreated polymer solutions. The power law model, consistency index (k), and power law index (n) of polymer solution viscosity were compared. For viscoelastic properties, storage modulus and loss modulus were examined. The results demonstrated that, viscosity of carbomer and MC solution (1 and 2 %) were changed after steam sterilization. No difference in viscosity was observed for PVP, PVA and poloxamer solution, between untreated and treated samples. The storage and loss moduli of PVA solution after autoclaving were not different when comparing with the untreated polymer solution. From this study, it could be concluded that the sterilization treatment influenced the viscosity behavior and viscoelastic properties of polymer solution used as viscosity-inducing agent in ophthalmic solution. Therefore, the selection of polymer and sterilization method should be carefully considered.
