摘要：This paper investigates the influence of ship-loading condition on slamming during water entry. Three typical sections of the S-175 container ship, namely the bow, parallel middle body and stern, under three different loading conditions are studied. Full-sized models are established and simulated by commercial software LS-DYNA based on the explicit finite element method (FEM) using the arbitrary Lagrangian−Eulerian (ALE) algorithm. At first, validation is carried out by simulating the Wave Induced Loads on Ships Joint Industry Project II (WILS JIP-II) ship section entering the water and by verifying that the response is in good agreement with published experimental data. Then, nine different cases with three typical sections of the container ship and three different loadings, including the no-load (lightship weight), half-load and full-load weights of the ship, are investigated. Finally, the influence of the ship loading and sectional shape on the water impacts is analyzed and discussed. The present study is useful for the analysis of loading effects on ship slamming at the early stage of ship design.
