摘要：During five-axis CNC machining, the dynamic tracking error of the five-axis machine tool caused by imperfect servo dynamic performance is the major factor affecting the accuracy during high-speed and high-precision manufacturing. Rotation tool center point (RTCP) test has become a typical kinematic test for the dynamic tracking error of five-axis machine tools. According to the mechanism and characteristics of dynamic tracking error, during the RTCP test, relating the measured dynamic tracking error to corresponding occurring situation is helpful for the research of calibration or reduction of dynamic tracking error. In this paper, a new method to relate dynamic tracking error to occurring situation based on additional rectilinear motion is attempted. During this method, rectilinear motions are added into the RTCP test process, and the dynamic tracking error and corresponding occurring position can be calculated from the scale of rectilinear motion. By six tests with rectilinear motions in and against X, Y and Z directions, the additional error and uncertainty of the test process can be offset by calculation. This method can be implemented without any addition or modification to the instrument or NC system.
