摘要：The main objective of the presented scientific article is to define the mechanical properties of polypropylene homopolymer with a prescribed percentage ratio of recycled granulate. The chosen material is intended for injection molding and especially for the production of products made by additive technologies. Experimental verification of the mechanical properties was realized by testing samples produced with various concentrations of the recycled material. Experimental samples underwent tests to obtain the mechanical properties of the produced new material. These tests included rheological tests, tensile and flexural tests as well as and Charpy impact toughness tests. These mechanical tests were conducted according to ISO standards valid for the individual testing method. Testing methods were carried out using prescribed numbers of testing samples. The presented scientific article is also focused on changes in microstructures of testing materials in relation to the percentage ratio of recycled granulate. Recycled granulate of thermoplastic was not necessity for additional modifications.
