摘要：This paper reports on the improvements of a simulation model for ship motions in following and quartering waves. The authors use a wave-piercing tumblehome vessel as a subject ship. The existing 4-DoF (degrees of freedom) model shows some limitation in its capability for predicting broaching of this vessel. In a free-running model experiment for the vessel, we observed rudder and propeller emersion from the water leading to broaching. This rudder and propeller emersions can significantly reduce steering performance. To express these rudder and propeller emersions, we should take account of not only roll but also pitch and heave.Therefore the authors develop a 6-DoF model. With the heave and pitch motion, we can calculate the local draft variation for calculating wave exiting forces and moments. Roll restoring variations are one of the important factors to estimate roll motions.Therefore we theoretically estimate restoring variations in wave then we found the tendency of variation dramatically changes due to the roll angle. Submergence of superstructure can be important for that variation. We also consider the variation of maneuvering coefficients and rudder forces in waves which are relevant to broaching. To estimate these variations, we conduct PMM tests, straight-line tests and rudder angle tests in waves using a scale model of subject ship. With some of these improvements, we obtain better agreements with experimental results than existing 4-DoF model.
