摘要：Correction to:
Scientific Reports 10.1038/s41598-021-87858-9, published online 16 April 2021
The original version of this Article contained an error, where unit “mHz” was incorrectly given as “MHz”.
As a result, in the Methods section, under the subheading ‘Electrochemical impedance spectroscopy (EIS)’,
“EIS was conducted at 10 mV amplitude signal peak-to-peak corrosion potential (Ecorr) with a 10 MHz to 100 kHz of frequency range
39”.
now reads:
“EIS was conducted at 10 mV amplitude signal peak-to-peak corrosion potential (Ecorr) with a 10 mHz to 100 kHz of frequency range
39”.
And under the subheading ‘Dynamic electrochemical impedance spectroscopy (DEIS)’,
“The sampling frequency was 12.8 kHz, and the frequency range from 300 MHz to 4.5 kHz, with 8 points per decade of frequency was applied”.
now reads:
“The sampling frequency was 12.8 kHz, and the frequency range from 300 mHz to 4.5 kHz, with 8 points per decade of frequency was applied”.
The original Article has been corrected.
