摘要：Deposition of micron particles in heat exchange duct is commonly encountered in many thermal and HVAC engineering applications. Previous studies on this important issue always considered turbulent air flow regime without conjugate heat transfer (CHT). However, the flow regimes and the CHT may have significant influences on particle deposition behaviors. Therefore, this paper aims to study particle deposition characteristics in laminar flow (LF), developing turbulent flow (DTF) and fully developed turbulent flow (FDTF) regimes with and without CHT. The v′2‾−fturbulence model and discrete particle model (DPM) were used to predict gas phase and solid phase, respectively. Moreover, a modified discrete random walk method was adopted to model turbulent particle dispersion. The results showed that particle deposition velocities greatly increase for small particles (dp20μm) but keep invariable for large particles (dp20μm) due to thermophoretic deposition. WhenΔT=100Kanddp=1μm, the peak deposition velocity enhancement ratio reaches 3.8, 9.7 and 7.5 for LF, DTF and FDTF regimes respectively. Different flow regimes have obvious effects on the deposition characteristics. Particle deposition velocity for DTF regime is the highest, followed by FDTF case and LF case. Thermophoresis effect is reduced by the CHT, as the temperature difference decreases due to thermal conduction in solid domain. The CHT in DTF or FDTF regime has obviously larger effect on deposition characteristics, compared with the LF regime.
