期刊名称:Advances in Science and Technology Research Journal
印刷版ISSN:2080-4075
电子版ISSN:2299-8624
出版年度:2021
卷号:15
期号:2
页码:219-227
DOI:10.12913/22998624/133064
语种:English
出版社:Society of Polish Mechanical Engineers and Technicians
摘要:The article deals with simulating superfinishing of single-oscillating grooves. A model of the superfinishing tool was created according to the input information about the tool and the superfinishing process. Using this tool, a simulation of the cutting process was performed. The input parameters for the simulation were the cutting conditions, which determined the paths of individual grains of tools (process kinematics). The simulation is realized by gradual removal of the workpiece material by individual grains of the tool. The result of the simulation is the profile of the superfinished surface at an evaluation length of 1.25 mm. It is possible to determine the surface roughness parameters from the profile. Creating and displaying multiple profiles side by side produces a graphical model of the superfinished surface. The simulation can be used for numerical simulation experiments, where both material and energy are saved. The article presents one such experiment together with the results – the surface roughness was influenced by individual factors. The simulation results (surface roughness parameters and surface appearance) were compared with the real superfinished surface on the outer ring of the bearing. This surface was manufactured under mass production conditions. The comparison confirmed that a simulation is a suitable tool for research of abrasive machining methods. At the end of the article, there is a discussion about a possible improvement of the simulation – considering 3D grains of the tool.