首页    期刊浏览 2024年11月24日 星期日
登录注册

文章基本信息

  • 标题:Modeling the process of microbial biofilm formation on stainless steel with a different surface roughness
  • 本地全文:下载
  • 作者:Mykola Kukhtyn ; Khrystyna Kravcheniuk ; Ludmila Beyko
  • 期刊名称:Eastern-European Journal of Enterprise Technologies
  • 印刷版ISSN:1729-3774
  • 电子版ISSN:1729-4061
  • 出版年度:2019
  • 卷号:2
  • 期号:11
  • 页码:14-21
  • DOI:10.15587/1729-4061.2019.160142
  • 语种:English
  • 出版社:PC Technology Center
  • 摘要:This paper reports a study into the process of bacteria adhesion to surfaces of different roughness depending on sizes and shapes. It was determined that at the surface of stainless steel with a roughness of 2.687±0.014 μm, the film formation process in E. coli and S. aureus occurred equally over 3 to 24 hours and did not depend on the size of bacteria. This makes it possible to argue that rod-shaped and coccal bacteria freely attach themselves in the grooves of roughness, followed by the initial process related to the first stage of a biofilm formation. During sanitization, the hollows of roughness could host both the coccal and rod-shaped bacteria. At the surface of steel with a roughness of 0.95±0.092 μm the process of film formation in S. aureus occurred more intensely than in E. coli. Within 3 h of incubation, density of the formed biofilms S. aureus was 1.2 times larger compared to the biofilms E. coli. Over the following 15 hours of incubation, the biofilms S. aureus were on average 1.3 times denser. This suggests that S. aureus, due to a spherical form, can stay put in the hollows of roughness of 0.95±0.092 μm and quicker attach to the surface. At the same time, E. coli, owing to a rod-shaped shape, would attach at such a surface roughness to the hollows lengthwise only. It has been proven that at a surface roughness of 0.63±0.087 μm the intensity of the S. aureus film formation was on average 1.4 times faster than in E. coli. However, at a roughness of 0.16±0.018 μm the process of film formation occurred equally in E. coli and S. aureus, but the biofilms demonstrated lower density compared to those that formed at a roughness of 0.63±0.087 μm.Thus, the use of equipment with a roughness of less than 0.5 μm in the dairy industry will make it possible to reduce the attachment of microorganisms to surface and to decrease contamination of dairy products.
  • 关键词:microbial adhesion;formation of biofilms;roughness of stainless-steel surface;a film formation process.
国家哲学社会科学文献中心版权所有