期刊名称：Eastern-European Journal of Enterprise Technologies
印刷版ISSN：1729-3774
电子版ISSN：1729-4061
出版年度：2021
卷号：2
期号：12
页码：44-51
DOI：10.15587/1729-4061.2021.217579
语种：English
出版社：PC Technology Center
摘要：Ferronickel slag is a by-product of the nickel smelting process. Recycling of ferronickel slag is required since it contains valuable elements besides its potency to pollute the environment. In order to take advantage of the valuable materials and reducing the potential hazard, beneficiation of ferronickel slag is essential. Alkali fusion of ferronickel slag using Na2CO3 in the roasting process was carried out. This study aims to determine the decomposition of the mixture of ferronickel slag-Na2CO3 in the roasting process. Roasting temperature and time were 800–1,000?°C and 60?240?minutes, respectively. Characterizations of the ferronickel slag were conducted by XRF, ICP-OES, XRD and SEM-EDS. Meanwhile, roasted products were characterized using ICP-OES, XRD and SEM-EDS. Characterization of the ferronickel slag indicates that Mg and Si are the main elements followed by Fe, Al and Cr. Moreover, olivine is detected as the main phase. The roasting process caused percent weight loss of the roasted products, which indicates decomposition occurred and affected the elements content, phases and morphology. The roasting process at about 900?°C for 60?minutes is a preferable decomposition base on the process conditions applied and the change of elements content. Aluminum (Al) and chromium (Cr) content in the roasted products upgraded significantly compared to iron (Fe) and magnesium (Mg) content. Olivine phase transforms to some phases, which were bounded with the sodium compound such as Na2MgSiO4, Na4SiO4 and Na2CrO4. The rough layer is observed on the surface of the roasted product as a result of the decomposition process. It indicates that liquid-solid mass transfer is initiated from the surface.
