标题：Development of a system for organizing a modular design and technological preparation for the production of cast iron pistons for internal combustion engines
摘要：Modern engine building requires a significant increase in power, fuel efficiency and ensuring high environmental performance of internal combustion engines (ICE). When forcing the operating modes of diesel engines, one of the most loaded engine parts becomes a piston, due to a significant increase in mechanical and thermal stresses. With increasing load on the piston, the difficulty of meeting the high demands for them increases. When creating modern ICE and improving the quality of existing ones, special attention is paid to the design and technological preparation of the production of pistons, which is the object of research. Pistons determine the reliability and life of the engine as a whole.To solve this problem, all the main works related to the design and manufacture of cast-iron pistons are proposed to divide into separate modules, performed simultaneously in three areas: organizational, design and technological. These modules are integral sectors of a single modular system for organizing design and technological preparation for production of cast iron pistons. Modeling of the stressed-strain state of monolithic cast-iron pistons is considered for an example of implementation of one of the modules. The results of calculations of the stress-strain state and the temperature distribution field in the body of the piston are presented. The results show that the maximum temperature is 315 °C and concentrated on the edge of the combustion chamber. The stress does not exceed 617 MPa.
