摘要：Modern urban mobility needs new solutions to resolve high-complexity demands on urban traffic-control systems, including reducing congestion, fuel and energy consumption, and exhaust gas emissions. One example is urban motorways as key segments of the urban traffic network that do not achieve a satisfactory level of service to serve the increasing traffic demand. Another complex need arises by introducing the connected and autonomous vehicles (CAVs) and accompanying additional challenges that modern control systems must cope with. This study addresses the problem of decreasing the negative environmental aspects of traffic, which includes reducing congestion, fuel and energy consumption, and exhaust gas emissions. We applied a variable speed limit (VSL) based on Q-Learning that utilizes electric CAVs as speed-limit actuators in the control loop. The Q-Learning algorithm was combined with the two-step temporal difference target to increase the algorithm’s effectiveness for learning the VSL control policy for mixed traffic flows. We analyzed two different optimization criteria: total time spent on all vehicles in the traffic network and total energy consumption. Various mixed traffic flow scenarios were addressed with varying CAV penetration rates, and the obtained results were compared with a baseline no-control scenario and a rule-based VSL. The data about vehicle-emission class and the share of gasoline and diesel human-driven vehicles were taken from the actual data from the Croatian Bureau of Statistics. The obtained results show that Q-Learning-based VSL can learn the control policy and improve the macroscopic traffic parameters and total energy consumption and can reduce exhaust gas emissions for different electric CAV penetration rates. The results are most apparent in cases with low CAV penetration rates. Additionally, the results indicate that for the analyzed traffic demand, the increase in the CAV penetration rate alleviates the need to impose VSL control on an urban motorway.
