首页    期刊浏览 2024年10月06日 星期日
登录注册

文章基本信息

  • 标题:Shear Response of Recycled Aggregates Concrete Deep Beams Containing Steel Fibers and Web Openings
  • 本地全文:下载
  • 作者:Nancy Kachouh ; Tamer El-Maaddawy ; Hilal El-Hassan
  • 期刊名称:Sustainability
  • 印刷版ISSN:2071-1050
  • 出版年度:2022
  • 卷号:14
  • 期号:2
  • 页码:945
  • DOI:10.3390/su14020945
  • 语种:English
  • 出版社:MDPI, Open Access Journal
  • 摘要:Replacement of natural aggregates (NAs) with recycled concrete aggregates (RCAs) in complex reinforced concrete (RC) structural elements, such as deep beams with openings, supports environmental sustainability in the construction industry. This research investigates the shear response of RC deep beams with openings made with 100% RCAs. It also examines the effectiveness of using steel fibers as a replacement to the minimum conventional steel stirrups in RCA-based deep beams with web openings. A total of seven RC deep beams with a shear span-to-depth ratio (a/h) of 0.8 were constructed and tested. A circular opening with an opening height-to-depth ratio (h0/h) of 0.3 was placed in the middle of each shear span. Test parameters included the type of the coarse aggregate (NAs and RCAs), steel fiber volume fraction (vf = 1, 2, and 3%), and presence of the minimum conventional steel stirrups. The deep beam specimens with web openings made with 100% RCAs exhibited 13 to 18% reductions in the shear capacity relative to those of their counterparts made with NAs. The inclusion of conventional steel stirrups in RC deep beams with openings was less effective in improving the shear response when 100% RCAs was used. The addition of steel fibers remarkably improved the shear response of the tested RCA-based beams. The gain in the shear capacity of the RCA-based beams caused by the inclusion of steel fibers was in the range of 39 to 84%, whereas the use of conventional steel stirrups resulted in 18% strength gain. The use of 1% steel fiber volume fraction in the RCA-based beam with openings without steel stirrups was sufficient to restore 96% of the original shear capacity of the NA-based beam with conventional steel stirrups. The shear capacities obtained from the tests were compared with predictions of published analytical models. The predicted-to-measured shear capacity was in the range of 0.71 to 1.49.
国家哲学社会科学文献中心版权所有