摘要：In this work, a non-isolated DC–DC converter is presented that combines a voltage doubler circuit and switch inductor cell with the single ended primary inductor converter to achieve a high voltage gain at a low duty cycle and with reduced component count. The converter utilizes a single switch that makes its control very simple. The voltage stress across the semiconductor components is less than the output voltage, which makes it possible to use the diodes with reduced voltage rating and a switch with low turn-on resistance. In particular, performance principle of the proposed converter along with the steady state analysis such as voltage gain, voltage stress on semiconductor components, and design of inductors and capacitors, etc., are carried out and discussed in detail. Moreover, to regulate a constant voltage at a DC-link capacitor, back propagation algorithm-based adaptive control schemes are designed. These adaptive schemes enhance the system performance by dynamically updating the control law parameters in case of PV intermittency. Furthermore, a proportional resonant controller based on Naslin polynomial method is designed for the current control loop. The method describes a systematic procedure to calculate proportional gain, resonant gain, and all the coefficients for the resonant path. Finally, the proposed system is simulated in MATLAB and Simulink software to validate the analytical and theoretical concepts along with the efficacy of the proposed model.
