期刊名称：International Journal of Advances in Engineering and Management
电子版ISSN：2395-5252
出版年度：2021
卷号：3
期号：7
页码：2824-2832
DOI：10.35629/5252-030726282640
语种：English
出版社：IJAEM JOURNAL
摘要：Piston is the part of engine which converts heat and pressure energy liberated by fuel combustion into mechanical works. Engine piston is the most complex component among the automotive. The design procedure involves determination of various piston dimensions using analytical method under maximum power condition. The main objective of this work is to investigate the stress distribution, deformations resulting from thermal loads in the cross sections of the piston made of Mg-SiC composite with varying volume fractions (10%, 20% & 30%) of SiC particulates in the base metal Magnesium. The results are compared with the existing Al6061 piston currently in use in Bajaj Pulsar 150cc (4- stroke, 2 valve, Twin spark BSIV Complaint DTS-i Engine). A model of a piston was made using NX 10.0, thermal and static structural coupled analysis was done using ANSYS 18.1. This paper shows the use of AlSic material for the piston for analysis to obtain the deformations and stresses andcompared with the results obtained in the case of Aluminium alloy piston.
