摘要：Both the position and force control of robots are needed in industrial manufacturing, such as in assembly and grinding, etc. In this paper, we concentrate on two issues. One is the system oscillation in traditional hybrid force–position control (HFPC) during switching between force and position control because the diagonal elements in the selection matrix are either 0 or 1. Another issue is the poor force-tracking performance of conventional impedance control, which depends on accurate environmental models. To address these issues, a coupled force–position control (CFPC) method is presented in this paper by combining the proposed adaptive impedance control method with a modified HFPC method. The selection matrix S of HFPC is replaced with a weighted matrix Sw. A weighted matrix regulator is designed to realize smooth switching between position and force control by adjusting the matrix weights in real time, and an adaptive impedance control algorithm is proposed to improve the force-tracking performance in complex environments. To verify the feasibility of the CFPC method proposed in this paper, simulations and physical experiments were conducted. The results show that the CFPC method has the advantages of a better force-tracking performance and a smoother switching between position and force control compared to the traditional HFPC method. A grinding experiment was conducted to further compare the performances of the HFPC and CFPC methods. The roughness values of the ground plates were 0.059 μm for the HFPC method and 0.031 μm for the proposed CFPC method, which demonstrates that the proposed CFPC method has a better performance.
