摘要：Different strategies have been utilized by investigators with the intention of upgrading the thermal characteristics of ordinary liquids like water and kerosene oil. The focus is currently on hybrid nanomaterials since they are more efficient than nanofluids, so as to increase the thermal conductivity of fluids and mixtures. In a similar manner, this investigation is performed with the aim of breaking down the consistent mixed convection flow close to a two-dimensional unstable flow between two squeezing plates with homogeneous and heterogeneous reaction in the presence of hybrid nanoparticles of the porous medium. A sustainable suspension in the ethylene glycol with water is set by dissolving inorganic substances, iron oxide Fe3O4 and cobalt (Co), to form Fe3O4−Co/C2H6O2−H2O hybrid nanofluid. The numerical and analytical model portraying the fluid flow has been planned, and similitude conditions have been determined with the assistance of the same transformations. The shooting technique has been used to solve nonlinear numerical solution. To check the validity of the results obtained from the shooting mode, the Matlab built-in function BVP4c and Mathematica built-in function homotopy analysis method (HAM) are used. The influence of rising parameters on velocity, temperature, skin friction factor, Nusselt number, and Sherwood number is evaluated with the help of graphs and tables. It has been found in this work that to acquire a productive thermal framework, the hybrid nanoparticles should be considered instead of a single sort of nanoparticles. In addition, the velocities of both the hybrid nanofluids and simple nanofluids are upgraded by the mixed convection boundary, whereas they are decreased by the porosity. An augmentation in volumetric fraction of nanoparticles correlates to an increment in the heat transmission rate. It is also found that heat transfer rate for Fe3O4−Co/C2H6O2−H2O hybrid nanofluids (HNF) is better than that of the Fe3O4−C2H6O2−H2O of single nanofluids (SNF). This research shows that hybrid nanofluids play a significant part in the transfer of heat and in the distribution of nanofluids at higher temperatures.
