摘要：The deformation performance of aluminum alloy formwork under stress is investigated in this research using static tests. The entire model of aluminum alloy formwork under load during construction is investigated using finite element simulation. And then, there’s the project’s actual value. The function is established during the construction period under the limit state of typical use of the wall in terms of reliability. The fluctuation characteristics of the dependability index of the out-of-plane deformation of the concrete wall are explored, and various results are produced, by taking into account the various reinforcement variables of the aluminum formwork. The study discovered that when the number of uses increases during the turnover usage process, the bearing capacity of the building formwork support gradually decreases, and the associated reliability index falls below 2. Adding horizontal and vertical rods above 3.6 m to the single support system, in combination with other elements, is recommended to strengthen its stability. The results reveal that joint semirigidity and wall thickness have a significant influence on the ultimate bearing capacity of construction formwork. The change characteristics of building formwork ultimate bearing capacity in the process of repeated turnover use are studied by increasing the initial defect method to simulate the increase of building formwork turnover times, with the conclusion that the more repeated use times, the lower the building formwork ultimate bearing capacity.
