摘要：A steel alloy DP590 is commonly used for automobile applications because of its outstanding mechanical characteristics. One crucial limitation of this steel forming is that it has limited malleability and ductility. In this study, we compared the experimental forming limit diagram (FLD) for DP590 at RT and 800°C using stretching. An experiment with a strain rate of 0.01/s is carried out with samples cut in four different directions (0°,30°,60°& 90°) as seen from the rolling direction. Rolling direction specimens have been found to be among the stronger samples. FLD can be applied as a method for studying temperature differences in formability characteristics of DP590. Scanning electron microscopy was used for the analysis deformation pattern. Based on these results, it shows that the material has become significantly more formable.
关键词：Dual-Phase -590 steel;Hot forming;Room temperature(RT);scanning electron microscope(SEM);forming limit diagram (FLD);limiting dome height (LDH)
