摘要：Natural cortical bone is an important source of bionic bone repair materials. Sawing cortical bone is the first and important process in fabrication bone repair materials. However, the high sawing temperature could cause damage to bone tissue and nerves, and surface roughness should decrease osteoinductivity. In order to improve the cutting performance during sawing cortical bone, and the quality of prepared cortical bone slices, the band sawing process should be investigated and improved. In this paper, the novel cortical bone sawing experiment was designed with different feed rate and tooth pitch. Then, the influence of experimental parameters on temperature and roughness were analyzed with Analysis of Variance (ANOVA). The experimental results show that the lowest value of temperature is 35.5°C (tooth pitch is 8.46 mm, feed rate is 35 mm/s), the highest one is 73.8°C (tooth pitch is 4.20 mm, feed rate is 5 mm/s). And the turning point of surface roughness appear when the feed rate is 20 mm/s. Otherwise, the prediction model of sawing temperature and surface roughness could help to find optimal band sawing parameters of natural cortical bone.
关键词：Cortical bone;bone repair materials;sawing parameters;temperature and surface roughness
