摘要：This study set out to assess the respirable mass, surface area, and number concentrations of the α-quartz content particles (Cr-m, Cr-s and Cr-n) to which workers were exposed in six different exposure groups, the raw material handling (n=10), crushing (n=12), mixing (n=12), forming (n=10), furnace (n=10), and packaging (n=10), in a refractory material manufacturing plant. For Cr-m, the exposure values in sequence were found as: mixing (68.1 μ g/m3)>packaging (55.9 μ g/m3)>raw material handling (53.3 μ g/m3)>furnace (31.0 μ g/m3)>crushing (29.8 μ g/m3)>forming (22.4 μ g/m3). We also found that ~21.2-68.2% of the above Cr-m exceeded the current TLV-TWA for the α-quartz content (50 μ g/m3) suggesting a need for initiating control strategies immediately. We further conducted particle size-segregating samplings in four workplaces: crushing (n=3), mixing (n=3), forming (n=3), and furnace (n=3). We found that all resultant particle size distributions shared a quite similar geometric standard deviation (σg; =2.24-2.92), but the process area, associated with higher mechanical energy (i.e., crushing process), contained finer α-quartz content particles (mass median aerodynamic diameter; MMAD=3.22 μ m) than those areas associated with lower mechanical energy (i.e., mixing, forming, and furnace; MMAD=6.17, 5.95, and 8.92 μ m, respectively). These results gave a ratio of Cr-m in the above four exposure groups (i.e., crushing: mixing: forming: furnace=1.00: 2.30: 0.753: 1.04) which was quite different from those of Cr-s (1.00: 1.74: 0.654: 0.530) and Cr-n (1.00: 1.27: 0.572: 0.202). Our results clearly indicate the importance of measuring particle size distributions for assessing workers' free silica exposures.
关键词：α-quartz content;Mass concentration;Surface area concentration;Number concentration;Exposure assessment
