摘要：The development of real-time tsunami forecast and rapid tsunami warning systems is crucial in order to mitigate tsunami disasters. The present study shows that tsunami prediction from a seismic centroid moment tensor (CMT) solution would work satisfactorily for the 2013 Santa Cruz Islands earthquake (Mw 8.0) tsunami even though the earthquake source had been modeled as a complicated source characterized by two patches of slip in a past study. We numerically solved the equations for a linear dispersive wave on a spherical coordinate system from the initial tsunami height distribution derived from the CMT solution and a classical scaling law for earthquake faults. The tsunami simulations well explain the observed tsunami arrival times, polarities of initial wave, and maximum amplitudes obtained by deep-ocean pressure measurements. The comparison of the simulation results from dispersive and non-dispersive modeling indicates that the dispersive modeling reproduced the observed waveforms better than the conventional non-dispersive approach. Also, the area affected by a maximum height greater than 0.4 m is decreased by approximately 34% by using dispersion modeling. Those results indicate that the tsunami prediction based on CMT solutions is useful for early warning, and the modeling of dispersion can significantly improve performance.
