期刊名称：International Journal of Engineering and Computer Science
印刷版ISSN：2319-7242
出版年度：2013
卷号：2
期号：1
页码：311-317
出版社：IJECS
摘要：In recent years, the communication industry has started focusing on fourth generation (4G) mobile communication systems. It is expected that 4G will provide a comprehensive and secure IP solution where voice, data, and multimedia can be offered to users at “anytime, anywhere” with higher data rates than previous generations. To improve spectrum efficiency and achieve as high as 100Mbps wireless transmission rate, 4G requires more advanced communication techniques to be employed. Multiple input multiple output (MIMO) and orthogonal frequency division multiplexing (OFDM) have, therefore, been adopted due to their superior performance. However, OFDM has few disadvantages; with the key one is high ratio of peak power of signal to average power is called peak-to-average power ratio; abbreviated as PAPR. It is preferred to have a minimum PAPR, as it will allow a higher average power to be transmitted for a fixed peak power; and thus, improving the overall signal to noise ratio at the receiver. Therefore, this paper investigates two signal scrambling techniques, namely, selected mapping (SLM) and partial transmit sequence (PTS) for the purpose of reducing PAPR. From the analysis, it is inferred that PTS method provides a better PAPR reduction performance compared to SLM method. However, the transmitter and receiver complexity is very high. Thus in practical applications, a tradeoff needs to be made between good performance and auxiliary information. It is also found that SLM algorithm is more suitable if system can tolerate more redundant information; otherwise, PTS algorithm is more acceptable when complexity becomes the first considering factor
关键词：Signal scrambling techniques; OFDM conventional; Peak to Average Power Ratio; PTS and SLM.
