期刊名称：ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
印刷版ISSN：2194-9042
电子版ISSN：2194-9050
出版年度：2015
卷号：XL-1/W5
页码：179-184
DOI：10.5194/isprsarchives-XL-1-W5-179-2015
出版社：Copernicus Publications
摘要：Due to the SAR1 geometry imaging, SAR images include geometric distortions that would be erroneous image information and the images should be geometrically calibrated. As the radar systems are side looking, geometric distortion such as shadow, foreshortening and layover are occurred. To compensate these geometric distortions, information about sensor position, imaging geometry and target altitude from ellipsoid should be available. In this paper, a method for geometric calibration of SAR images is proposed. The method uses Range-Doppler equations. In this method, for the image georeferencing, the DEM2 of SRTM with 30m pixel size is used and also exact ephemeris data of the sensor is required. In the algorithm proposed in this paper, first digital elevation model transmit to range and azimuth direction. By applying this process, errors caused by topography such as foreshortening and layover are removed in the transferred DEM. Then, the position of the corners on original image is found base on the transferred DEM. Next, original image registered to transfer DEM by 8 parameters projective transformation. The output is the georeferenced image that its geometric distortions are removed. The advantage of the method described in this article is that it does not require any control point as well as the need to attitude and rotational parameters of the sensor. Since the ground range resolution of used images are about 30m, the geocoded images using the method described in this paper have an accuracy about 20m (subpixel) in planimetry and about 30m in altimetry.
