首页    期刊浏览 2024年11月30日 星期六
登录注册

文章基本信息

  • 标题:Study of Heat Pipe Cooling in A Machining Process
  • 本地全文:下载
  • 作者:S.Nakkeeran ; V.Ganesh Ram ; Dr. J. Hameed Hussain
  • 期刊名称:International Journal of Innovative Research in Science, Engineering and Technology
  • 印刷版ISSN:2347-6710
  • 电子版ISSN:2319-8753
  • 出版年度:2015
  • 卷号:4
  • 期号:4
  • 页码:2273
  • DOI:10.15680/IJIRSET.2015.0404162
  • 出版社:S&S Publications
  • 摘要:Tool wear of machine tools and large usage of cutting fluids is one of the major problems in manufacturing. Cutting fluids are used to cool down the tool and have been shown to cause environmental problems in machine shops. Tool life and temperature have an inverse relationship, namely that the higher the temperature at the tool-chip interface is, the lower the tool life will be, and vice-versa. This paper investigates the performance of a cutting tool embedded with a heat pipe on reducing cutting temperature and wear in machining. The temperature of a tool plays an important role in thermal distortion and the machined part.s dimensional accuracy, as well as the tool life in machining. A new embedded heat pipe technology has been developed to effectively remove the heat generated at the tool–chip interface in machining, thereby, reducing tool wear and prolonging tool life. In particular, the technique can effectively minimize pollution and contamination of the environment caused by cutting fluids, and the health problems of skin exposure and particulate inhalation in manufacturing. Experiments should be carried out in both with and without heat pipe in machining and the temperature will be measured. The ANSYS finite element analysis should be carried out to determine the temperature near the cutting edge
  • 关键词:Dry machining. Tool design. Heat pipe. Heat transfer. Wear. Temperature
国家哲学社会科学文献中心版权所有