期刊名称：International Journal of Multimedia and Ubiquitous Engineering
印刷版ISSN：1975-0080
出版年度：2015
卷号：10
期号：3
页码：59-70
DOI：10.14257/ijmue.2015.10.3.06
出版社：SERSC
摘要：Wi-Fi positioning system is widely being studied in many fields of smartphones. In an open air environment a GPS receiver is able to determine its position with a high level accuracy. But in inside a building, where the GPS signal is bad or unavailable or unappreciated. The position estimation from the GPS receiver is very erroneous and has no practical use. Wi-Fi triangulation system is applied in indoor location but faced signal coverage error. Therefore, we propose a method of indoor positioning that determines the user's current position with the nearby Wi-Fi routers and cellular network signal strength RSSI values. This Signal strength RSSI estimates the location fingerprints based on at least two wireless Access Points and an alternative Cellular network or three access points. The cellular network is an alternative backup of unreached Wi-Fi Access point where this Access point's coverage is unknown or sparse. Predefined points are used to measure distance from a user could also generate advance level accuracy. Referring to the floor map, our method adjusts the real-time user's current location. Gravity sensor works on the back end to control Wi-Fi scanning enable or disable considering user movement for energy efficiency. We have implemented the proposed method on Android smart phones and our test results are discussed in this paper.
