摘要:This paper presents a study of chemical inhomogeneity formation indirect casting of a 6 to ingot, using the AnyCasting software (Var.3.10,2009). The ingot was obtained from steel with a medium content of carbon alloyed with chromium, molybdenum and vanadium, type 1.2344 (X40CrMoV51) (conf. DIN 17350), using the procedure of ingot mould gravity filling (direct casting). Such an ingot is subsequently subjected to a hot plastic deformation in order to obtain flat semifinished. The presence of these semi-finished of chemical inhomogeneities influences the behaviour of the ingot deformation.